Product Description: Starothane 222 is an aliphatic polyurethane based roll-on floor coating recommended for external applications. It has excellent adhesion over primed and screeded surfaces and offers excellent resistance to UV radiation to prevent colour fading

Area of Uses:
Starothane 222 G is used as a topcoat for Deck Floor Systems. It is applied over primed surfaces. Key features :
1. Light stable
2. Fast curing.
3. Good abrasion resistance
4. Good chemical resistance

Technical Data :
•Type :Aliphatic
•Type : Polyester-aliphatic isocyanate
•Mixing ratio (R:H) : 3 : 1 by volume
•Finish : Glossy
•Colour : Desired shade
•Volume solids : 45 – 50%
•Recommended DFT D 1186 : 100 microns
•Tensile strength ASTM D 638 : 25 – 35 MPa
•Elongation ASTM D 638 : 15 – 25 %
•Abrasion resistance ASTM D 4060 : 85 – 91 mg
•Drying time ASTM D 1640
•Surface dry : 1-2 hrs
•Tack free dry : 3-4 hrs
•Hard dry : 24 hrs
•Flash point ASTM D 3278 : Above 290C
•Theoretical coverage : 4-5 sq m / litre / coat @ 100 microns
•Application : By roller / brush
•Shelf life : 6 months in the un-opened container

Chemical resistance Excellent resistance is observed against distilled water, detergent solutions, alkalies and acids. Chemical spillages should always be wiped up as quickly as possible and not be allowed to concentrate up by evaporation. The data on the list of the chemicals found resistant to this product during our lab study is available on request.

Packaging available in 5 and 20 litre packs and has a maximum shelf life of 6 months in the un-opened containers.

Storage & Shelf Life :
● The product should be stored in accordance with national regulations. It should be kept in a cool, well ventilated area, away from heat, direct sunlight, sparks and children. Handle with care. Mix resin and hardener as per the ratio. Use the mix solution within the pot life time.

Handling & Safety :
Observe reasonable care and employ ordinary hygienic principles such as washing the hands with soap and water before eating or smoking. It is recommended to wear gloves, goggles and nose masks while application. Incase of splashes on the skin, dampen the cloth with thinner and wipe the hands with the cloth. Incase of contact with eyes, rinse with plenty of water and seek medical advice. Incase of continuous exposure to vapour, the applicator should be immediately moved to get fresh air Wash then with soap and water. Dried film is non toxic.

Download to Safety Data Sheet