Product Description: Three component, solvent free, self levelling epoxy polyurethane flooring

Features :
• Self levelling coatings with excellent flow & levelling characteristics
• Conforms to the Global Migration Standards laid down in US-FDA: 21CFR 175-300
• Very high abrasion, impact and mar resistance
• Excellent flexibility and tensile strength
• Resistance to aggressive corrosive environment
• Excellent inter-coat adhesion over aged/ old epoxy coatings
• Finds application in chemical & fertilizer processing and storage areas, pharmaceutical industry, automotive assembly & service areas and other heavy engineering industries with heavy movements and vibrations

Technical Data :
•Recommended DFT / Coat 1 – 2 mm
•Theoretical Covering Capacity 0.32 sq.mtr /kg @ 2 mm DFT (0.5 sq.mtr/ litre) 0.64 sq.mtr /kg @ 1 mm DFT (1.0 sq.mtr/ litre)
•Drying Time Surface Dry : 6 hours
•Hard Dry : 24 hours
•Full Cure : 7 days
•Mixing Ratio (by weight) Base : Hardener : Aggregate (Base to aggregate ratio would vary with shade) 36.5 : 16.5 : 47.0
•Pot life :30 minutes
•Compressive Strength (ASTM C 579) 72 MPa
•Flexural Strength (ASTM C 580) 32 MPa
•Tensile Strength (ASTM C 307) 18 MPa

Application:
• Concrete substrates must be sound and of sufficient compressive strength (minimum 20 Mpa) with a minimum tensile strength of 1.5 Mpa
• A sound, clean and dry substrate is absolutely essential for successful coating application and ensuring maximum bonding between the substrate and coating system
• The substrate must be clean, dry and free of all contaminants such as dirt, oil, grease, coatings and surface treatments, etc. and have a moisture content less than 5% prior to application of the primer. Ensure that the substrate does not suffer from rising moisture and potential osmosis problems

Storage & Shelf Life :
● Stored unopened in dry conditions under covered space ● Shelf life will be 9 months in unopened condition

Handling & Safety :
Take normal precautions to avoid skin contact. Provide well ventilated conditions or use suitable respiratory protection. Wash thoroughly with a suitable resin removing cream – any areas where product comes into contact with skin followed by washing with soap and water. Splashes in the eyes should be well flushed out at least 10 minutes with water or a proprietary eye wash and medical attention sought. This product is flammable and should be kept away from sparks and naked flames – Smoking is strictly prohibited as product is flammable.

Download to Safety Data Sheet